5.Also see: All Macs with the A1278 Model Number, the 2351* EMC Number, and the MacBookPro7,1 Model Identifier. Reboot the computer-hold down the Control and Command keys and press the Power button, or press and hold the Power button for 5 to 10 seconds to shut down the computer, then press the Power button to restart. Press F2 (with the fn key pressed and not pressed) to increase the screen brightness setting. For more about these identifiers and how to locate them on each Mac, please refer to 's Mac Identification section. 661-6593 Super Drive, 8X,SLOT,SATA A1278.Also see: All Macs with the A1278 Model Number, the 2351* EMC Number, and the MacBookPro7,1 Model Identifier. 661-6594 LCD Clamshell Display Assembly for Macbook Pro 13" Mid 2012 A1278. 13.3-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors. FWIW: I am currently on Catalina with 8GB and am upgrading to 16GB. When I have asked, others suggested staying with Mojave. Monterey: Only MBP Early 2015 and newer. My reading of Apple’s compatibility list for for Monterey and Big Sur is that the Mid-2012 MBP is not eligible. It should show a public IP address has been assigned. The light on the front of the Base Station should now be green and you can confirm all is okay by opening the Airport Utility once more and clicking on the Airport Extreme. Once complete it will tell you its now available. It will now configure the device with the options. No password is required but the Base Station will insist one is entered. In the password field just hit the spacebar. If all is well then It will now ask to configure the WAN. If you get a screen appear like below then check the WAN cable is firmly plugged in. Enter your information into it then click next. Once selected it will come up with a prompt for you to set it up. If not click Other Airport Base Stations and select your one. Once opened it should pick up the reset station and prompt you to set it up. This can be found in Applications\Utilities. Once reset open up Airport Utility on your mac. The reset button is circled in red below. To do this make sure the Base Station is turned on and then hold in the reset button until the light at the front goes orange and flashes. Now plug a network cable from one of the other ports on the back of the Base Station to your mac.įor Ease so your at the same level as me I would recommend resetting the Base Station back to factory defaults. You should have the WAN cable going from the BT Openreach modem box which is pictured at the top to the WAN port of the Apple Airport Extreme Base Station which is below. The end result should be the same as below. I have circled the correct port in the picture below. Unplug the cable from the red port and then plug it into the WAN port on the Apple Airport Extreme Base Station. I’ve included a picture of the back for your reference The BT infinity WAN port is labelled as BT Infinity and coloured Red. Why BT didn’t choose to make all of them gigabit is beyond me.įirst of all we are going to need to plug unplug the WAN cable from the BT Homehub and place it into the WAN port on the Airport Base Station. The main gripe for me with the BT Homehub is that it only has 1 Gigabit port on it. This is possible and I thought I would make a quick guide on how to achieve this. I have seen on the internet a few questions with regards to replacing the standard issued BT Homehub with an Apple Airport Extreme Base Station.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |